Revision history for MMAcrobatics


Revision [1492]

Last edited on 2012-03-06 15:46:51 by GilbertoLeon
Additions:
||**Surface**||**DC**||
||More than 12 in. wide||5||
||7-12 in. wide||10||
||2-6 in. wide||15||
||Less than 2 in. wide||20||
||Uneven or angled||+5||
||Slippery||+5||
Deletions:
{{table columns="2" cellpadding="1" cells="Surface;DC;More than 12 in. wide;5;7-12 in. wide;10;2-6 in. wide;15;Less than 2 in. wide;20;Uneven or angled;+5;Slippery;+5"}}


Revision [1150]

Edited on 2010-09-05 14:35:11 by GilbertoLeon
Additions:
- //Accelerated Movement:// You can try to move faster than normal while balancing. You can move your full speed, but take a -5 penalty on your Acrobatics check. Moving twice your speed requires two checks, one for each move action.
- //Jumping:// You can make an Acrobatics check to extend the distance you can jump (see Jumping, page 34) by 1 foot per point your check exceeds DC 15.
- //Falling:// You can make an Acrobatics check (DC 5) to lessen damage from a fall. Subtract the amount your roll exceeds the DC from the distance of a fall in feet before determining damage. So an Acrobatics check of 20 (15 more than the DC) reduces the effective distance of a fall by 15 feet. A fall reduced to 0 distance does no damage and you land on your feet. You can reduce knockback damage in the same way (see Knockback, page 165).
- //Avoiding Being Tripped:// You can make an Acrobatics check in place of the Strength or Dexterity check to avoid a trip attack (see Trip, page 159). You cannot use Acrobatics to make trip attacks, however.
- //Instant Up:// You can make an Acrobatics check (DC 20) to stand from a prone position as a free action rather than a move action.
- //Performance:// You can use Acrobatics as an [[MMExpertise Expertise]] skill to impress an audience.
**Try Again:** No.
**Action:** Free. If you actually move as part of your Acrobatics check, then it counts as part of your move action.
**Special:** The balancing aspects of Acrobatics can be used untrained.


Revision [1149]

Edited on 2010-09-05 14:30:53 by GilbertoLeon
Additions:
{{table columns="2" cellpadding="1" cells="Surface;DC;More than 12 in. wide;5;7-12 in. wide;10;2-6 in. wide;15;Less than 2 in. wide;20;Uneven or angled;+5;Slippery;+5"}}


Revision [1148]

The oldest known version of this page was created on 2010-09-05 14:29:18 by GilbertoLeon
Valid XHTML :: Valid CSS: :: Powered by WikkaWiki